Products - Vector Magnets

Products

Metal Injection Molding

Metal injection molding (MIM) is a metalworking process in which finely-powdered metal is mixed with binder material to create a "feedstock" that is then shaped and solidified using injection molding. The molding process allows high volume, complex parts to be shaped in a single step. After molding, the part undergoes conditioning operations to remove the binder (debinding) and densify the powders. Finished products are small components used in many industries and applications.

Magnetic Assembly

Magnets has become an integral material widely used in a variety of aspects we can think and those we can't. For example, in power generation, they are found in motors, generators, transformers, etc.; in electricals, we see them in magnetic components, microwave valves; in electronics, filters, sensitizers in telecommunications are using loads of magnets; in military defense, magnets help to build magnetic torpedo, electromagnetic gun, Besides, magnets are made into components or assemblies for storing, transmitting and converting electromagnetic energy or signal in miscellaneous industries like mine detections, ocean exploration, new technologies in IT, energy, biotechnology, space technologies, etc. Sometimes the natural form of the material can be directly used (such as magnetic liquid).

NdFeB Magnets

Sintered NdFeB Magnets

Compression Molding Bonded NdFeB Magnets

Injection Molding Bonded NdFeB Magnets

NdFeB Flexible Rubber Magnets

AlNiCo Magnets

Cast AlNiCo Magnets

Sintered AlNiCo Magnets

SmCo Magnets

Sintered SmCo Magnets

A samarium–cobalt (SmCo) magnet, a type of rare earth magnet, is a strong permanent magnet made of an alloy of samarium and cobalt. They were developed in the early 1970s by Albert Gale and Dilip K. Das of Raytheon Corporation. They are generally ranked similarly in strength to neodymium magnets, but have higher temperature ratings and higher coercivity. They are brittle, and prone to cracking and chipping. Samarium–cobalt magnets have maximum energy products (BHmax) that range from 16 megagauss-oersteds (MGOe) to 33 MGOe, that is approx. 128 kJ/m3 to 264 kJ/m3; their theoretical limit is 34 MGOe, about 272 kJ/m3. They are available in two "series", namely Series 1:5 and Series 2:17

Ferrite Magnets

Sintered (Hard) Ferrite Magnets

Ferrite Flexible Rubber Magnets

Bonded Ferrite Magnets - Compression Molding

Bonded Ferrite Magnets - Injection Molding

Bonded Ferrite Magnets - Extrusion Molding

FeCrCo Magnets

FeCrCo Magnets

Professional manufacturer of asphalt machines. Our sales and R&D team have over 10 years’ experience to focus on asphalt distributor, synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation Professional manufacturer of asphalt machines. Our sales and R&D team have over 10 years’
experience to focus on asphalt distributor, synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation

SmFeN Magnets

Professional manufacturer of asphalt machines. Our sales and R&D team have over 10 years’ experience to focus on asphalt distributor, synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation Professional manufacturer of asphalt machines. Our sales and R&D team have over 10 years’
experience to focus on asphalt distributor, synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation

Soft Magnetic Materials

Soft magnetic materials are those materials that are easily magnetized and demagnetized. They typically have intrinsic coercivity less than 1000 A/m. They are used primarily to enhance and/or channel the flux produced by an electric current. The main parameter, often used as a figure of merit for soft magnetic materials, is the relative permeability ( mr, where mr = B/moH), which is a measure of how readily the material responds to the applied magnetic field. The other main parameters of interest are the coercivity, the saturation magnetisation and the electrical conductivity.

Devices

This is a title

Professional manufacturer of asphalt machines. Our sales and R&D team have over 10 years’ experience to focus on asphalt distributor, synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation Professional manufacturer of asphalt machines. Our sales and R&D team have over 10 years’
experience to focus on asphalt distributor, synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation.

Equipment

This is a title

Professional manufacturer of asphalt machines. Our sales and R&D team have over 10 years’ experience to focus on asphalt distributor, synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation Professional manufacturer of asphalt machines. Our sales and R&D team have over 10 years’
experience to focus on asphalt distributor, synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation

Pot magnets

Pot Magnets With Cylindrical Boreholes

Pot Magnets with Countersunk Borehole

Pot Magnets With Threaded Stem

Pot Magnets With Screw Socket

Pot Magnets With Internal Thread

Glue-in Pot Magnets / Cup Magnets

Pot Magnets With Hook

Pot Magnets with Eyelet

Office Magnets

Pin Magnet

Memo Magnets

Cone Magnets

Other Office Magnets

Service

Magnet Test

Dimension

Surface Flux

Flux Density

Hysterisis Graph

Plating/Coating Thickness

Flux Density

BH Curve