How does electric motor drive the vehicle?

How does electric motor drive the vehicle?

Summary

Compared with traditional fuel vehicles, the most prominent change for pure electric vehicles is three parts: electric motors, battery packs and electronic control systems. This text mainly introduces the electric motors of pure electric vehicles.

How does electric motor drive the vehicle?

The engine of most fuel vehicles generates heat (explosion) by igniting gasoline in the cylinder, which pushes the piston to move up and down in four strokes, and converts it into rotational motion through the crank connecting rod, forming the power to drive the car. In other words, the engine, like the ancient steam engine, converts heat energy into mechanical energy.

The relationship between fuel engine working speed (RPM) and efficiency (EFFICIENCY)

The engine can only produce usable torque and power within a limited speed range. In other words, if the car has only one gear (only the first gear with manual transmission), then no matter how you step on the accelerator and make the engine spin wildly, after the car reaches a certain speed (generally no more than 20km/h), it will not speed up anymore.

 

This brings a lot of follow-up troubles:

1. The engine must be kept within the optimal speed range;

2. Therefore, a transmission device must be equipped to adjust the power output by the engine;

3. The engine has a very low energy efficiency (less than 42%)


On the other hand, looking at the "motor" of the "electric car", everything seems simple, because:

1. We don't need to worry the engine is wasting energy when it converts the up and down movement into rotating movement. Because the rotor of the motor is originally rotating;

2. We no longer worry about energy efficiency. Because the motor can maintain about 90% energy efficiency at any speed;


Schematic diagram of motor principle:

1. When the direct current(DC) power supply is connected to the rotor winding, the current starts to run in the direction of the blue arrow in the figure, and the rotor winding starts to rotate due to electromagnetic induction.

2. When the rotor rotates 90°, the commutator cuts off the circuit, and no current flows in the rotor winding, but the rotor will continue to rotate under the action of inertia.
3. When the direct current(DC) power supply is connected to the rotor winding, the current starts to run in the direction of the blue arrow in the figure, and the rotor winding starts to rotate due to electromagnetic induction.
4. As the rotor continues to rotate, the commutator changes the direction of the current, so that the rotor windings continue to rotate in the original direction by electromagnetic induction.

There’re two types of motors are commonly used.

There are many kinds of electric motors, in this article we are talking about that used as traction motor for electric vehicles. First, according to different working power sources, motors can be divided into two categories: DC motors and AC motors.

AC motors can be divided into two categories: synchronous AC motors and asynchronous AC motors according to whether the rotor and stator magnetic fields are the same. Synchronous AC motors can be divided into permanent magnet synchronous AC motors and excitation synchronous AC motors; asynchronous AC motors are divided into three-phase asynchronous AC motors and single-phase asynchronous AC motors.

Most of the current household electric vehicles use AC motors, and are mainly composed of three-phase asynchronous AC motors and permanent magnet synchronous AC motors.

Basic composition of AC motor:

There are two main components: stator and rotor.

Rotor: Inside the stator is the rotor, which is either a cylinder with many wires wrapped around it (i.e. a wound rotor), or a cylinder with a cage structure (i.e. a cage rotor, as shown above). Because the rotor is not fixed, but is connected to the power output shaft to rotate, it is also called the rotor.

 

Rotor and stator: There are no connection or contact between the two (this gap is called an air gap, usually 0.2~1mm), and they are sheathed in a sleeve structure. When the stator winding is connected to AC power, the rotor will rotate and output power.

 

The working principle of the asynchronous AC motor is simply: the energized winding rotates in the rotating magnetic field. Take the asynchronous AC motor (i.e., asynchronous induction motor) that is also used by Tesla Motors as an example.

 

The stator and the rotor in the motor are not in contact. Why does the rotor rotate when the stator winding is energized? asynchronous motor working principle:

Asynchronous motor working principle GIF

Magnetic field rotation speed of stator magnetic field rotation direction: N1

Rotor rotation speed: N2

N1>N2 Asynchronous AC Electric Motor

N1=N2 Synchronous AC Electric Motor

Throughout the work process, we will find an interesting phenomenon: because the stator needs to be energized to generate a rotating magnetic field, this magnetic field causes the rotor to rotate by electromagnetic induction, so the rotor speed is not synchronized with the stator magnetic field speed (the speed difference is about 2%~5%). Therefore, we call it an asynchronous AC motor. Conversely, if the two speeds are the same, we call it a synchronous AC motor.

 

The most widely used asynchronous AC motors in the industrial field are three-phase asynchronous AC motors. In the field of electric vehicles, Tesla Motors and NIO Motors are representative of using such motors.

The working principle of three-phase asynchronous AC motor

The special feature of the three-phase asynchronous AC motor is that the stator winding is a symmetrical three-phase winding in space. As shown in the figure above, the position of each phase in space differs by 120° from each other. When the three-phase windings are connected in a star shape and the alternating current is connected, then three symmetrical currents (three-phase currents) are generated in the stator.

The influence of the internal stator magnetic field of a three-phase AC motor on the rotor:

The rotating magnetic field vector formed by the three-phase current will superimpose and affect the rotor, so that the rotor can rotate faster (compared to the single-phase asynchronous AC motor), and its speed can reach 12000~15000r/min, thereby driving electric vehicles.

Features of AC motors:

Let me talk about its advantages first, we can see from the above structure and working principle introduction:

1. The structure is simple, the weight is relatively light, and the volume is relatively small;

2. Reliable operation and durable;

3. The motor body has low manufacturing cost and easy maintenance.


The common structure of a synchronous motor:

Earlier, we mentioned that in an asynchronous AC motor, under the action of Lenz's law, the rotor follows the rotating magnetic field of the stator to rotate, which causes the two speeds to be asynchronous, so it is called an asynchronous motor.

However, if the current in the rotor winding is not induced by the stator rotating magnetic field, but generated by itself, that is, the rotor magnetic field has nothing to do with the stator rotating magnetic field, and its magnetic pole direction is fixed, then according to the principle of same sex repulsion and opposite sex attraction, The rotating magnetic field of the stator will pull the rotor to rotate, and make the rotor magnetic field and the rotor and the stator rotating magnetic field rotate synchronously. This is the basic working idea of a synchronous motor.


 Common structure and principle of permanent magnet synchronous motor:

Compared with asynchronous motors, because the rotor has its own magnetism, when the stator windings are energized, the rotor is immediately stressed, which makes the stator magnetic field and the rotor speed synchronized.

 

Features of permanent magnet synchronous motor

It has a higher power-to-mass ratio, smaller size, lighter weight, greater output torque than other types of motors, and its limit speed and braking performance are also excellent. Therefore, permanent magnet synchronous motors have become current electric vehicle applications the most electric motors.

However, the performance of permanent magnet motors is closely related to permanent magnet materials. The permanent magnet materials currently used in permanent magnet motors include ferrite, aluminum nickel diamond, samarium cobalt, neodymium iron boron and so on.

1. Ferrite: low price, linear demagnetization characteristics, it is a commonly used permanent magnet material. Ferrite has a low magnetic energy product, and a motor made of ferrite has a larger volume.

2. AlNiCo: The material has high remanence, but low coercivity, low demagnetization resistance, short life, and is less used in motors.

3. Samarium cobalt: The material has high remanence and coercivity. The only drawback is that there are not many resources and expensive, which limits the application.

4. Neodymium iron boron: The material has high remanence, coercivity, magnetic energy product and relatively low price. It is currently the most suitable permanent magnet material.

 

China has abundant NdFeB materials-rare earth metals. The rare earth permanent magnet material has excellent magnetic properties. After magnetization, it does not require additional energy to establish a strong permanent magnetic field. The rare earth permanent magnet motor used to replace traditional motors is not only efficient, but also simple in structure, reliable in operation, and bulky. Small and light.

Rare earth permanent magnet motors can not only achieve high performance (such as high efficiency, high speed, and high response speed) that traditional excitation motors can’t match, but can also be made into special motors that can meet specific operating requirements, such as elevator traction motors, and car-specific drives Electric motors, etc.

In addition, the properties of permanent magnet materials are usually related to temperature. If the temperature of the magnet increases, the rate of loss of remanence will increase. If the temperature of the permanent magnet exceeds the Curie temperature, it will completely lose its magnetism (magnetism is zero). The demagnetization characteristic curve changes with temperature, and within a certain temperature range, its change is reversible and approximately linear.